Sample application

blemesh sample application implements Bluetooth Mesh node that supports On/Off and Level models.

To build application use following target. Note that since this application uses Non-resolvable Private Address there is no need for configuring public address.

newt target create blemesh
newt target set blemesh app=@apache-mynewt-core/apps/blemesh
newt target set blemesh bsp=@apache-mynewt-core/hw/bsp/nrf52840pdk
newt target set blemesh build_profile=optimized
newt target set blemesh syscfg=BLE_MESH_PB_GATT=1:BLE_MESH_DEV_UUID='(uint8_t[16]){0x22, 0x20, 0}'

Every device should have unique Device UUID so config amend and rebuild is needed for each of the devices that will be added to a network.

newt target set blemesh syscfg=BLE_MESH_PB_GATT=1:BLE_MESH_DEV_UUID='(uint8_t[16]){0x22, 0x21, 0}'
...
newt target set blemesh syscfg=BLE_MESH_PB_GATT=1:BLE_MESH_DEV_UUID='(uint8_t[16]){0x22, 0x22, 0}'
...
newt target set blemesh syscfg=BLE_MESH_PB_GATT=1:BLE_MESH_DEV_UUID='(uint8_t[16]){0x22, 0x23, 0}'

GATT bearer is enabled so that it is possible to provision those with Bluetooth Mesh application from Silicon Labs (available here) which doesn’t support advertising bearer.